Hour National Service Hotline
HURS SERVICE HOTLINE
Address: Dalin Industrial Zone, Shifan Town, Yueqing, Wenzhou, Zhejiang
Service Hotline: 400-0988-567
1.Install hidden alloy saw blade, high safety performance;
2. Coolant spray directly on the tooth surface, no burr on the cut surface, the saw blade is more durable;
3.Automatic control of the material pressing cylinder, cutting speed is controlled by the hydraulic pump station, without interval adjustment, the cutting performance is more stable;
4. The machine head is made of solid cast iron, with high precision and durability;
5. The only manufacturer in China that uses linear guides can better protect the parallelism of the saw blade;
6. Both sides are equipped with feeding racks, which can be positioned in the front and can be fed in the rear, which can be sawed simultaneously
7. Centralized recycling of aluminum scraps;
8. It is widely applicable to various square, round, and special-shaped aluminum profiles, copper, and plasticized materials. The cutting effect is obvious.
YJ455Y series high-speed hydraulic pressure cutting aluminum machine is a product developed by our company on the basis of absorbing foreign advanced technology. In addition to manually feeding at the required length (limitable position) during sawing, a feeding rack can be designed and installed according to customer service requirements.
This machine has the advantages of small volume, convenient operation, low noise, no dust pollution, good sawing quality, no burrs in the cut, no need for secondary processing, and good production efficiency.
One. Main specifications and technical parameters of machine tools
Main specifications: YJ-455Y
Cutting angle: 90 degrees-45 degrees
Maximum sawing width: 400mm
Maximum cutting height: 145mm
Spindle speed: 2800-3000rpm
Worktable area: 820mmx600xx
Worktable height: 750mm
Required pressure: 5-6kg / cm:
Machine size: 1300mmx630mmx1450mm:
Packing duration: 1400mmx650mmx1500mm
Mechanical weight: 750kg
°& 45° 90 ° & 45 °
°& 45° 90 ° & 45 °
Install the largest saw blade
working desk size
365 * 645
530 * 830
780 * 780 * 1300MM
1350 * 1000 * 1480MM
1000 * 390mm before, 1500 * 390mm after
1000 * 390mm before, 1500 * 390mm after
Installation and commissioning
1. When installing, please place the machine in a bright, dry space and pay attention to maintain a sufficient safe distance from surrounding obstacles, place it on a suitable base surface, and stabilize the whole machine. Adjust the appropriate height of the screws to match the work surface
2. Connect the air source to the plug and the effective air pressure of the air pump.
3. Open the oil filling hole of the hydraulic pump, add No. 46 hydraulic oil, and add the effective capacity to half of the see-through lens.
4. Check if the belt is tight and adjust. Check whether the rotation direction of the main shaft is consistent with the direction indicated by the machine. If not, replace the two power connectors.
5. Saw blade installation Open the protective cover, install the saw blade in the direction indicated by the machine (the same direction as the car saw teeth) and tighten the gland nut. Close the protective cover and door lock after installation
6. The air source is adjusted through a triple-connected pressure valve to ensure a pressure of 0.5-0.7Mpa
7. Turn on the power, start the motor for a short time, and check that there is no abnormal vibration and noise.
1. Wear safety protective equipment when operating the machine and check whether the pressing mechanism is reliable. Adjust the compression stroke according to the size of the workpiece, whether the air pressure reaches 0.5-0.7Mpa and keeps stable. Check whether the saw blade is locked and the rotation direction of the saw blade is correct. Run dry for several times. It can only be used after normal operation.
2.Each pneumatic component is lubricated by a three-piece oil dripping mechanism, which is used to adjust the oil amount adjustment screw (large amount of left-handed oil and small amount of right-handed oil), and the oil is dripped once every 50 times. When the oil storage bottle is used up, the oil filling screw must be unscrewed to ensure that there is sufficient oil.
3. Turn on the power, place the workpiece in the required position, and then depress the foot switch. After the workpiece is cut off, release the foot switch and the saw blade will automatically return. In case of emergency, press the main power switch on the electric control box.
four. Safety Precautions
★. Non-operators must keep a certain safety distance from the machine.
★. Wear protective equipment properly, do not wear loose clothes, do not wear belts, jewelry, do not wear slippers, long hair must wear a work cap, cuffs must be tightened, and a protective cover.
★. Keep the machine and surrounding environment clean.
★. Inspect, debug, repair and clean aluminum shavings at the bottom of the machine, etc., remember to isolate the power supply.
★. The processed object shall not exceed the design scope, and shall not be too large or too small, and special workpieces shall be equipped with corresponding fixtures.
★ .Use the tool correctly, keep it sharp and clean, and have a good balance.
★ .Before starting, you must ensure that all parts work normally.
★. Cultivate good habits, do not place tools, fixtures, etc.
★. Try to insert the saw blade on the electric control box, and pay attention to the clamping and cutting
★. Empty car test machine can be tested by saw blade to see if the machine works normally,
★. Remember to tighten the cutting direction when cutting the material, otherwise it will cause a safety accident due to the saw blade jumping.
★. The water tank maintains sufficient water level, has good cooling and section smoothness for the saw blade
★ .If the pump is blocked, please clean up the aluminum powder in time.
Fives. Repair and maintenance of the machine
1. When starting up in winter, select full gear, and warm up for 1-3 minutes in no-load operation.
2. Lubricate the hinge pins such as pressing and feeding once every shift. Saw blade spindle bearings are refueled every three months.
3. Cylinder lubrication By adjusting the three-piece screw, it is guaranteed to run 1 drop / 20 times.
4. After work, clean up the aluminum shavings on the machine tool, fill the lubricating parts with lubricating oil, and disconnect the power supply.
5. Do not use saw blades with pure teeth.
6. Must be used within the design scope of this machine.
7. The material to be processed must be placed horizontally, otherwise the saw blade will be damaged.
、 全自动切管机 、母线加工机、双头倒角机、液压铝锯床、气动 切管机等产品生产加工制造和销售为一体的综合性 切管机 厂家 ；各种管材型材的切割、成型、铆接等加工工艺的理想配套设备商，提供最全面的切管机定制方案咨询，切管机价格咨询；全国统一服务热线：400-0988-567 Yueqing Deshun Machinery Co., Ltd. specializes in the production, processing, manufacturing and sales of automatic aluminum cutting machines , automatic tube cutting machines , bus processing machines, double-head chamfering machines, hydraulic aluminum sawing machines, pneumatic pipe cutting machines and other products. Comprehensive pipe cutting machine manufacturer ; ideal supporting equipment supplier for cutting, forming, riveting and other processing processes of various pipe profiles, providing the most comprehensive consultation of cutting machine tailoring solutions, pipe cutting machine price consultation; national unified service hotline: 400 -0988-567